AmSkills

On-the-job Training

• Demonstrates basics of measurement, materials, and safety of products and parts
  • Identifies and demonstrates use of machine safety and personal protective equipment
  • Demonstrates compliance with lock-out / tag-out procedures and OSHA requirements and guidelines
  • Handles and stores hazardous materials as assigned while adhering to safe practices in accordance with OSHA and EPA requirements and guidelines
  • Develops an inspection plan and inspects simple parts using precision tools and techniques while preparing reports on the compliance of the parts
  • Performs the inspection of parts
  • Follows a sampling plan to allow for process control
  • Analyzes the performance of a single-part production process
  • As a member of a process team, analyzes the performance of a production process
  • Keeps the duty station, tools, workbenches, and manual equipment clean and safe for work
  • Inspects and assesses the general condition of an assigned machine tool
  • Inspects and assesses the condition of tooling
• Conducts job planning, layout, and benchwork
  • Lays out the location of hole centers and surfaces with accuracy
  • Using aluminum or mild steel, hand drills and hand taps holes
  • Sets up and performs sawing to a layout
  • Develops a process plan for a part requiring milling, drilling, turning, or grinding
• Operates manufacturing equipment – Manual
  • Sets up and operates machine tools to perform routine drilling operations
  • Sets up and performs squaring up the six surfaces of a block to within +/- .2 inch and .002 inch over 4.5 inches squareness
  • Sets up and operates vertical milling machines
  • Sets up and operates, turning operations - between centers
  • Sets up and operates, turning operations - chucking
  • Sets up and operates manual surface grinders
• Generates CNC programming and operates a milling machine
  • Using the principles of Cartesian coordinates, develops a program for the manufacture of a simple part
  • Creates a qualified CNC program, sets up and operates the mill, changes tool values as necessary, and replaces and qualifies tooling as necessary
  • Sets up and operates a CNC mill or CNC milling center
  • Writes sophisticated G-code programs
  • Creates programs using a manufacturing modeling software package
• Generates CNC programming and operates a CNC lathe
  • Sets up and carries out, between centers and with chucks, turning operations
  • Uses the principles of Cartesian coordinates to develop a program for the manufacture of a simple part
  • Operates a CNC lathe or turning center
  • Writes sophisticated programs
  • Creates programs using a manufacturing modeling software package