Production Technician: Water Tech Concentration - 2020
Competency-based
ONET: 17-3029.09
3
Years
22
Skills
792h
Related instructions
Classroom instruction topics
- Special Projects: Water Technology
- Introduction to Water/Wastewater Operation
- Water Treatment Plant Operations I & II
- Water Treatment Plant Operations III, IV & V
- Water Distribution I & II
- Water Distribution III, IV & V
- Wastewater Treatment Plant Operations I & II
- Wastewater Plant Operations III, IV & V
- Test Procedures for Water and Wastewater
- Introduction to Wastewater Collections
- Environmental Laws and Regulations
- Introduction to Water Use Efficiency
- Introduction to Water Utility Management
- Cooperative Work Experience: Water Technology
- Wells, Pumps and Motors
- Basic Waterworks Mathematics
- Wastewater Technology Math
On-the-job training
- Production, Processing Skills
- Calibrate, operate, and adjust equipment
- Understand considerations related to source water
- Understand and operate processes for preliminary, primary, secondary, and tertiary wastewater treatment
- Understand and operate processes related to water treatment: coagulation/flocculation/sedimentation, filtration, disinfection, and corrosion control
- Conduct, disinfection, chemical addition, effluent discharge, and solids handling
- Respond to abnormal plant conditions with proper corrective action
- Apply health, safety, and emergency procedures
- Operations Monitoring Skills
- Perform prescribed process observations and measurements
- Assess the results of process observations and measurements
- Report observations and measurements with emphasis on abnormal conditions
- Quality Control Skills
- Understand and practice proper operating procedures
- Perform stream sampling and lab analysis
- Contribute to continuous improvement of processes and procedures
- Documentation Skills
- Record production process instrument readings
- Maintain operational logs
- Document health, safety, and emergency matters
- Project Management Skills
- Calibrate equipment
- Perform PMs as specified
- Test operation of repaired equipment
- Inspect and evaluate equipment for wear and abnormal conditions
- Maintenance, Troubleshooting & Repair Metrology Equipment
- Inspect measurement equipment for abnormal conditions
- Perform corrective maintenance on measurement equipment
FIND APPRENTICESHIPS BY STATE
AlabamaAlaskaAmerican SamoaArizonaArkansasCaliforniaColoradoConnecticutDelawareFloridaGeorgiaGuamHawaiiIdahoIllinoisIndianaIowaKansasKentuckyLouisianaMaineMarylandMassachusettsMichiganMinnesotaMississippiMissouriMontanaNebraskaNevadaNew HampshireNew JerseyNew MexicoNew YorkNorth CarolinaNorth DakotaNorthern Mariana IslandsOhioOklahomaOregonPennsylvaniaPuerto RicoRhode IslandSouth CarolinaSouth DakotaTennesseeTexasUtahVermontVirginiaVirgin IslandsWashingtonWashington D.C.West VirginiaWisconsinWyoming
Made in the USA.