Construction Craft Labor (CDH Inc.)
Hybrid-based
ONET: 47-2061.00
2
Years
32
Skills
300h
Related instructions
5100h
On-the-job training
Classroom instruction topics
- CPR
- Skid Steer
- Exacavator Cert
- Excavator Training Cert
- Forklift Training
- Misc Eq Training
- Scissor Lift Training
- Bottle Watch
- Hole Watch
- FIT Test
- Back Safety
- Aerial Lift
- Eye Safety
- Line of Fire Prevention
- Trench & Excavation
- Fall Protection
- Hearing Conservation
- Benzene
- Driving Safety
- Crystaline Silica
- Fire Prevention / Fire Extinguisher
- Industrial Ergonomics
- First Aid
- PSM / Contractor Responsibilites
- Hand and Power Tools
- Heat Stress
- Bloodborne Pathogens
- GFCI & Electrical Safety
- HAZCOM SDS/CHEMICAL LABLES
- Behavioral Safety
- Short Service Employee
- Near Miss Reporting
- Ladder Safety
- JSA Training
- Drug and Alcohol Abuse
- LOTO
- Lead Awareness
- Confined Space
- PPE
- Respiratory Protection
- Welding, Cutting, Hot Work
- Asbestos Awareness
- Scaffold Safety
- Slips, Trips, and Falls
- Cold Weather Stress
- Spotter Policy
- Hydrogen Sulfide
- HAZWOPER / RCRA
- Customer Required
- HASC / Safety Essentials
On-the-job training
- Operate pumps or compressors.
- Tend pumps, compressors, or generators to provide power for tools, machinery, or equipment or to heat or move materials, such as asphalt.
- Clean equipment or facilities.
- Lubricate, clean, or repair machinery, equipment, or tools.
- Maintain construction tools or equipment.
- Lubricate, clean, or repair machinery, equipment, or tools.
- Signal equipment operators to indicate proper equipment positioning.
- Signal equipment operators to facilitate alignment, movement, or adjustment of machinery, equipment, or materials.
- Position structural components.
- Position, join, align, or seal structural components, such as concrete wall sections or pipes.
- Direct vehicle traffic.
- Control traffic passing near, in, or around work zones.
- Review blueprints or specifications to determine work requirements.
- Read plans, instructions, or specifications to determine work activities.
- Finish concrete surfaces.
- Smooth or finish freshly poured cement or concrete, using floats, trowels, screeds, or powered cement finishing tools.
- Test air quality at work sites.
- Operate or maintain air monitoring or other sampling devices in confined or hazardous environments.
- Clean work sites.
- Clean or prepare construction sites to eliminate possible hazards.
- Compact materials to create level bases.
- Dig ditches or trenches, backfill excavations, or compact and level earth to grade specifications, using picks, shovels, pneumatic tampers, or rakes.
- Dig holes or trenches.
- Dig ditches or trenches, backfill excavations, or compact and level earth to grade specifications, using picks, shovels, pneumatic tampers, or rakes.
- Mark reference points on construction materials.
- Measure, mark, or record openings or distances to layout areas where construction work will be performed.
- Measure work site dimensions.
- Measure, mark, or record openings or distances to layout areas where construction work will be performed.
- Assemble temporary equipment or structures.
- Erect or dismantle scaffolding, shoring, braces, traffic barricades, ramps, or other temporary structures.
- Dismantle equipment or temporary structures.
- Erect or dismantle scaffolding, shoring, braces, traffic barricades, ramps, or other temporary structures.
- Load or unload materials used in construction or extraction.
- Load, unload, or identify building materials, machinery, or tools, distributing them to the appropriate locations, according to project plans or specifications.
- Move construction or extraction materials to locations where they are needed.
- Load, unload, or identify building materials, machinery, or tools, distributing them to the appropriate locations, according to project plans or specifications.
- Assist skilled construction or extraction personnel.
- Provide assistance to craft workers, such as carpenters, plasterers, or masons.
- Apply paint to surfaces.
- Mop, brush, or spread paints, cleaning solutions, or other compounds over surfaces to clean them or to provide protection.
- Apply sealants or other protective coatings.
- Apply caulking compounds by hand or caulking guns to protect against entry of water or air.
- Clean surfaces in preparation for work activities.
- Mop, brush, or spread paints, cleaning solutions, or other compounds over surfaces to clean them or to provide protection.
- Spray materials, such as water, sand, steam, vinyl, paint, or stucco, through hoses to clean, coat, or seal surfaces.
- Remove worn, damaged or outdated materials from work areas.
- Raze buildings or salvage useful materials.
- Position construction forms or molds.
- Position or dismantle forms for pouring concrete, using saws, hammers, nails, or bolts.
- Smooth surfaces with abrasive materials or tools.
- Grind, scrape, sand, or polish surfaces, such as concrete, marble, terrazzo, or wood flooring, using abrasive tools or machines.
- Mix substances or compounds needed for work activities.
- Mix, pour, or spread concrete, using portable cement mixers.
- Mix ingredients to create compounds for covering or cleaning surfaces.
- Break up rock, asphalt, or concrete.
- Operate jackhammers or drills to break up concrete or pavement.
- Pour materials into or on designated areas.
- Mix, pour, or spread concrete, using portable cement mixers.
- Spread concrete or other aggregate mixtures.
- Mix, pour, or spread concrete, using portable cement mixers.
- Prepare hazardous waste for processing or disposal.
- Identify, pack, or transport hazardous or radioactive materials.
FIND APPRENTICESHIPS BY STATE
AlabamaAlaskaAmerican SamoaArizonaArkansasCaliforniaColoradoConnecticutDelawareFloridaGeorgiaGuamHawaiiIdahoIllinoisIndianaIowaKansasKentuckyLouisianaMaineMarylandMassachusettsMichiganMinnesotaMississippiMissouriMontanaNebraskaNevadaNew HampshireNew JerseyNew MexicoNew YorkNorth CarolinaNorth DakotaNorthern Mariana IslandsOhioOklahomaOregonPennsylvaniaPuerto RicoRhode IslandSouth CarolinaSouth DakotaTennesseeTexasUtahVermontVirginiaVirgin IslandsWashingtonWashington D.C.West VirginiaWisconsinWyoming
Made in the USA.